Journal

  1. J. Stroh*, D. Sediako, D. Weiss, “The Effects of Iron-Bearing Intermetallics on the Fitness-For-Service Performance of a Rare-Earth-Modified A356 Alloy for Next Generation Automotive Powertrains”, J. of Metals (invited), 2021, 11, 788. (impact factor 2.3) Open access:  
  2. J. Stroh*, D. Sediako, T. Hanes, K. Anderson, and A. Monroe, “The Effects of Heat Treatment on the Microstructure and Tensile Properties of a HPDC Marine Transmission Gearcase”, J. of Metals (invited), 2021, Vol. 11(3), 517. 17 pages. (impact factor 2.3) Open access:
  3. S. Kianfar*, J. Stroh*, N. Bahramian*, D. Sediako, A. Lombardi, G. Byczynski, Philipp Mayr*, M. Reid, A. Paradowska, “Residual Stress Prediction in the Casting Process of Automotive Powertrain Components. In: Perander L. (eds) Light Metals 2021. The Minerals, Metals & Materials Series. Springer, Cham., pp 858-864
  4. J. Stroh*, D. Sediako, D. Weiss, “The Effect of Rare Earth Mischmetal on the High Temperature Tensile Properties of an A356 Aluminum Alloy. In: Perander L. (eds) Light Metals 2021. The Minerals, Metals & Materials Series. Springer, Cham.
  5. D. Sediako, J. Stroh*, S. Kianfar*, “Residual Stress in Automotive Powertrains: Methods and Analyses”, Materials Research Forum, Trans Tech Publications, Switzerland, 2021, Vol.1016, pp. 1291-1298 https://www.scientific.net/MSF.1016.1291
  6. Sina Kianfar*, E. Aghaie*, J. Stroh*, D. Sediako, and J. Tjong, “Residual Stress, Microstructure, and Mechanical Properties Analysis of HPDC Aluminum Engine Block with Cast-In Iron Liners”, Materials Today Communications, Accepted Oct. 22, 2020, availableonline 2 Nov.2020, (impact factor 2.8)
  7. E. Aghaie*; J. Stroh*, D. Sediako; A. Rashidi*; A. Milani, “Improving the Mechanical Properties of the B319 Aluminum Alloy by Addition of Cerium”, Materials Science & Engineering A, Structural materials : properties, microstructure and processing, 08/2020, Volume 793 (impact factor 4.7)
  8. J. Stroh*, D. Sediako, D. Weiss, “Development of Cerium-Reinforced Specialty Aluminum Alloy with Application of X-ray and Neutron Diffraction”, International Journal of Metalcasting (467), May 2020
  9. J. Stroh*, D. Sediako, G. Byczynski, A. Lombardi, A. Paradowska, “Stress Characterization of Bore-Chilled Sand Cast Aluminum Engine Blocks in As-Cast and T7 Condition with Application of Neutron Diffraction”. In: Tomsett A. (eds) Light Metals 2020. The Minerals, Metals & Materials Series. Springer, Cham., pp. 153-157
  10. J. Stroh*, D. Sediako, D. Weiss, V. Peterson, “In-Situ Neutron Diffraction Solidification Analyses of Rare Earth Reinforced Hypoeutectic and Hypereutectic Aluminum-Silicon Alloys”, In: Tomsett A. (eds) Light Metals 2020. The Minerals, Metals & Materials Series. Springer, Cham., pp. 174-178
  11. Jonas Valloton*, Dieter Herlach*, H. Henein, D. Sediako, “Scandium effect on undercooling and dendrite morphology of Al-4.5wt% Cu droplets”, Materials and Metallurgical Transactions A, Vol. 50A, December 2019, pp. 5700 – 5706, (impact factor 2.3)
  12. Abdoul-Aziz Bogno*, H. Henein, D.G. Ivey, J. Valloton*, D. Sediako, G. Reinhart, M. Gallerneault, “Effects of Scandium on Rapid Solidified Hypo-Eutectic Aluminum Copper”, Canadian Metallurgical Quarterly, CMQ1375R1, Nov. 2019, pp 101-115  
  13. Eli Vandersluis*, Comondore Ravindran; Dimitry Sediako; Abdallah Elsayed; Glenn Byczynski “Strontium-Modification in the Stepwise Solidification of A319 Al Alloy: An In-Situ Neutron Diffraction Study”, Journal of Alloys and Compounds, Vol. 792, April 2019, pp. 240-249, (impact factor 3.8)
  14. A. Lombardi, D. Sediako, C. Ravindran, and M. Barati, “Analysis of Precipitation, Dissolution and Incipient Melting of Al2Cu in B206 Al Alloy using In-situ Neutron Diffraction”, Journal of Alloys and Compounds 784 (2019) pp. 1017-1025,  (impact factor 3.8). 
  15. J Stroh*, D Sediako, “Residual Stress Characterization for Marine Gear Cases in As-Cast and T5 Heat Treated Conditions with Application of Neutron Diffraction”, Light Metals 2019, The Minerals, Metals & Materials Series. Springer, pp. 395-399
  16. Eli Vandersluis*; Abdallah Elsayed; Francesco D’Elia; Payam Emadi*; Dimitry Sediako; Comondore Ravindran, “Crystalline Phase Solidification Analysis Using In-Situ Neutron Diffraction”, Transactions of the Indian Institute of Metals (TIIM), (2018) 71(11):2777–2781, (impact factor 1.1)
  17. D. Sediako, J. Stroh*, A. McDougall*, and E. Aghaie*, ”Residual Stress Analysis of A362 Aluminum Alloy Gear Case Using Neutron Diffraction”, Materials Science Forum Online: 2018-12-26, ISSN: 1662-9752, Vol. 941, pp 1288-1294,
  18. E. Vandersluis*, D. Sediako, P. Emadi*, C. Ravindran, A. Elsayed, G. Byczynski, “Determination of Temperature-Dependent Crystallographic Parameters of Al-Si Alloys Using In-Situ Neutron Diffraction”, Journal of Applied Crystallography, 2018, Vol. 51, pp. 1141-1150 (impact factor 3.5)
  19. J. Stroh*, D. Sediako, “Microstructure and In-Situ Solidification Analysis of Al-Ce-Mg Alloy”, Physics in Canada, 2018, (invited), Vol. 74, no. 1-2, pp. 41-44
  20. E. Vandersluis*, D. Sediako, C. Ravindran, A. Elsayed, G. Byczynski, “Analysis of Eutectic Silicon Modification During Solidification of Al-6Si Using In-Situ Neutron Diffraction”, Journal of Alloys and Compounds, 736 (2018), pp. 172-180. (impact factor 3.8)
  21. S. Fudger*, D. Sediako, P. Karandikar, C. Ni, “Residual Stress Induced Mechanical Property Enhancement in Steel Encapsulated Light Metal Matrix Composites”, Material Science and Engineering A, vol. 699, pp. 10-17, 2017, available online May 20, 2017, (impact factor 3.4)
  22. S. Fudger*, D. Sediako, P. Karandikar, C. Ni, “Residual StressAnalysis within Steel Encapsulated Metal Matrix Composites via Neutron Diffraction””, S. Ikhmayies et al. (eds.), Characterization of Minerals, Metals, and Materials 2017, The Minerals, Metals & Materials Series, pp. 405-413, DOI 10.1007/978-3-319-51382-9_44
  23. Jonas Valloton*, Dieter Herlach*, Hani Henein, and Dimitry Sediako, “Microstructural quantification of rapidly solidified undercooled D2 tool steel”, Materials and Metallurgical Transactions A, October 2017, Volume 48, Issue 10, pp 4735–4743 (impact factor 2.0)
  24. M. Smith*, J.-B. Levesque*, L. Bichler, D. Sediako, J. Gholipour, P. Wanjara, “Residual stress analysis in linear friction welded in-service Inconel 718 superalloy via neutron diffraction and contour method approaches”, Materials Science & Engineering A, , Vol. 691, 2017, pp. 168–179 Available online 10 March 2017, (impact factor 3.5)
  25. A. Lombardi*, E. Vandersluis*, D. Sediako, C. Ravindran, “Neutron Diffraction Analysis of Light Alloys: A Review”, Materials Science Forum, Vol. 879, 2017, pp. 1558-1563
  26. A. Lombardi, A. Elsayed, D. Sediako, C. Ravindran, “Analysis of the Solidification Characteristics of a 319 Type Al Alloy using In-situ Neutron Diffraction”, Journal of Alloys and Compounds, Vol. 695 (2017), pp. 2628-2636 (impact factor 3.8)
  27. M. Smith*, L. Bichler, D. Sediako, “Measurement of Residual Stresses in Linear Friction Welded In-Service Inconel 718 Superalloy”, Materials Science Forum, ISSN: 1662-9752, Vol. 879, pp 1800-1806, doi:10.4028/www.scientific.net/MSF.879.1800, Online: 2016-11-15
  28. Dimitry G. Sediako, Wojciech Kasprzak, Frank Czerwinski, Ahmed M. Nabawy*, Amir R. Farkoosh*, “High Temperature Creep Evolution In Al-Si Alloys Developed for Automotive Powertrain Applications A Neutron In-Situ Study on hkl-Plane Creep Response”, LIGHT METALS 2016, pp. 131–136,
  29. L. Huang*, J. Moraes, D. Sediako, J. Jordon , H. Guo, X. Su, “Finite Element and Residual Stress Analysis of Self-piercing Riveting in Dissimilar Metal Sheets”, Journal of Manufacturing Science and Engineering, online August 15, 2016, February 2017, Vol. 139 / pp. 021007 1-11; (impact factor 3.5)
  30. S. Ahmad*, D. Sediako, A. Lombardi, C. Ravindran, R. MacKay, A.M. Nabawy, “Assessment of Residual Stress in T5 treated 319 Al Alloy Engine Blocks Using Neutron Diffraction”, SAE International Journal of Materials and Manufacturing, SAE Technical Paper 2016-01-0353, 2016, (impact factor 2.7)
  31. F. Czerwinski, W. Kasprzak, D. Sediako, D. Emadi*, S. K. Shaha, J. Friedman, and D.L. Chen, “High Temperature Aluminum Alloys for Automotive Powertrain”, Advanced Materials and Processes, March 2016, pp. 16-20
  32. A-A. Bogno*, U. Dahlborg, M. Calvo-Dahlborg, C. Riveros, N. Ciftci, H. Henein, D. Sediako, “Characterization of a {(Fe60Co40)75B20Si5}96Nb4  Impulse Atomized Glassy Powder by Neutron Diffraction and Differential Scanning  Calorimetry, Elsevier, Journal of Non-Crystalline Solids, 12/2015; 15 January 2016, 432 (2016) 466–470
  33. D. Sediako, W. Kasprzak, “In-situ Study of Microstructure Evolution in Solidification of Hypereutectic Al-Si Alloys with Application of Thermal Analysis and Neutron Diffraction”, Metallurgical and Materials Transactions A, 2015, Vol. 46A, September 2015, pp. 4160 – 4173,
  34. Lombardi*, A., Sediako, D., Machin, A., Ravindran, C., MacKay, R., “Transient Analysis of Residual Strain during Heat Treatment of Multi-material Engine Blocks using In-situ Neutron Diffraction”, Materials Letters, Vol. 157, October 2015, pp. 50-52
  35. A. Elsayed*, D. Sediako, & C. Ravindran, “Solidification Behavior of Mg-Zn and Mg-Zn-Zr Alloys Using In-Situ Neutron Diffraction”, Journal of Materials Engineering and Performance, published online April 2, 2015, Volume 24(6), June 2015, pp. 2250-2255
  36. D. Sediako, L. Bichler, CMQ Invited Paper Series Editorial, Canadian Metallurgical Quarterly , Volume 54, Issue 1 (January 2015), pp. 1-1
  37. A. Lombardi*; D. Sediako; C. Ravindran; R. MacKay; “In situ neutron diffraction analysis of stress-free d-spacing during solution heat treatment of modified 319 Al alloy engine blocks”, CMQ Invited Paper Series, Canadian Metallurgical Quarterly, Volume 54, Issue 1 (January 2015), pp. 30-37
  38. A. Elsayed*; D. Sediako; C. Ravindran, “Investigation of solidification behaviour of Mg–6Al and Mg–9Al alloys using in situ neutron diffraction”, CMQ Invited Paper Series, Canadian Metallurgical Quarterly, Volume 54, Issue 1 (January 2015), pp. 16-23
  39. F. D’Elia*, C. Ravindran, D. Sediako, R. Donaberger, “Solidification analysis of Al–5 wt-%Cu alloy using in situ neutron diffraction”, CMQ Invited Paper Series, Canadian Metallurgical Quarterly, Volume 54, Issue 1 (January 2015), pp. 9-15.
  40. F. D’Elia*, C. Ravindran, D. Sediako. “Interplay Among Solidification, Microstructure, Residual Strain and Hot Tearing in B206 Aluminum Alloy”, Materials Science & Engineering A, 624 (2015), pp.169–180.
  41. A. Lombardi*, C. Ravindran, D. Sediako, R. MacKay, “Determining the Mechanism of In-Service Cylinder Distortion in Aluminum Engine Blocks with Cast-in Gray Iron Liners”, Metallurgical and Materials Transactions A, : Volume 45, Issue 13 (2014), Page 6291-6303
  42. V. Kumar*, D. Sediako, L. Bichler, “Effect of Chill Parameters on the Residual Strain in Cast 319 Aluminum Alloy: A neutron diffraction study”, SAE Int. J. Mater. Manufacturing, Vol. 7, No. 2, (April 2014), pp. 411-414, © 2014 SAE International
  43. A. Lombardi*, C. Ravindran, D. Sediako, R. MacKay, “Residual Stress Mapping along the Cylinder Bores of Al Alloy Engine Blocks Subjected to Production Solution Heat Treatment Schedule”, SAE Int. J. Mater. Manf. / Volume 7, Issue 2 (April 2014), pp. 415-420, © 2014 SAE International
  44. F. D’Elia*, C. Ravindran, D. Sediako, K.U. Kainer, N. Hort, “Hot tearing mechanisms of B206 aluminum–copper alloy”, Materials and Design, Vol. 64, 2014, pp. 44-55. (Impact factor 4.6)
  45. F. D’Elia*, C. Ravindran, and D. Sediako, “Quantification of Residual Strain Associated with Reduction of Hot Tears by Grain Refinement in B206 Aluminum Alloy”, Canadian Metallurgical Quarterly, 2014, Vol. 53, No. 2, 2014, pp. 151-159
  46. Lombardi*, A., Ravindran, C., Sediako, D. and Mackay, R., “Analysis of Residual Strain Profiles in Distorted Aluminum Engine Blocks by Neutron Diffraction,” SAE Int. J. Mater. Manf. 6(2): 135-140, 2013
  47. L. Bichler, A. Siebert-Timmer*, D. Sediako, “Creep performance of wrought AX30 and EZ33 magnesium alloys”, Canadian Metallurgical Quarterly, 2013, Vol.52, No.4, pp. 430-438
  48. M. Fletcher*, L. Bichler, D. Sediako, and A. Siebert-Timmer, “Evolution of strain and microstructure during creep of wrought AE42 and ZE10 magnesium alloys”, Transactions of the Indian Institute of Metals, 2012, TIIM-D-12-00039R1
  49. A. Lombardi*, F. D’Elia*, C. Ravindran, D. Sediako, B.S. Murty, R. MacKay, “Interplay between Residual Stresses, Microstructure, Process Variables and Engine Block Casting Integrity”, Metallurgical and Materials Transactions A, December 2012, Vol.43, No.13, pp. 5258-5272
  50. S.H. Mousavi Anijdan*, D. Sediako, S. Yue, “Optimization of Flow Stress in Cool Deformed Nb-microalloyed Steel by Combining Strain Induced Transformation of Retained Austenite, Cooling Rate and Heat Treatment”, Acta Materialia, Vol. 60 (3), 2012, pp. 1221–1229.
  51. Anthony Lombardy*, Dimitry Sediako, Francesco D’Elia*, C. (Ravi) Ravindran, and Robert I. Mackay, “Neutron Diffraction Study on Residual Stress in Aluminum Engine Blocks Following Machining and Service Testing”, SAE Int. J. Mater. Manuf. April 2012 5:115-121;
  52. F. D’Elia*, C. Ravindran, D. Sediako, “Effect of Grain Refinement on Residual Strain and Hot Tearing in B206 Aluminum Alloy”, Trans Tech Publications, Switzerland, Advanced Materials Research, Vol. 409, 2012, 2011-11, p. 35-40
  53. W. Kasprzak, D. Sediako, M. Walker, M. Sahoo, and I. Swainson, “Solidification Analysis of an Al-19 Pct Si Alloy Using In-Situ Neutron Diffraction”, Metallurgical and Materials Transactions A, Volume 42A (7), July 2011, pp. 1854 – 1862
  54. D. Sediako, F. D’Elia*, A. Lombardi*, A. Machin, C. Ravindran, C. Hubbard, and R. Mackay, “Analysis of Residual Stress Profiles in the Cylinder Web Region of an As-Cast V6 Al Engine Block with Cast-In Fe Liners Using Neutron Diffraction”,  SAE International Journal of Materials and Manufacturing, June, 2011, 4 (1), 2011-06-15, pp. 138 – 151
  55. W. Kasprzak, D. Sediako, M. Walker, M. Sahoo, and I. Swainson, “Solidification Analysis of an Al-19 Pct Si Alloy Using In-Situ Neutron Diffraction”, Metallurgical and Materials Transactions A, published online 13 April, 2011, 42 (2011), 1854-1862
  56. L. Bichler, F. D’Elia, C. Ravindran, and D. Sediako, “Reduction of Hot Tears: Alloy and Casting Process Optimization Using Neutron Diffraction”, SAE International Journal of Materials and Manufacturing, August,  2010, Vol. 3, No. 1, ISSN: 1946-3979, 3 (1), 2010-12-04, pp. 484-492
  57. L. Bichler, C. Ravindran, D. Sediako, “Ex-Situ Measurement Of Strain Associated With Hot Tearing In Az91d And Ae42 Magnesium Alloys Using Neutron Diffraction”, Canadian Journal of Physics, 2010, Vol. 88, Issue 10, pp. 715-721.
  58. M. Çelikin, F. Zarandi, D. Sediako, M.O. Pekguleryuz, “Compressive Creep Behaviour of Cast Magnesium under Stresses above the Yield Strength and the Resultant Texture Evolution”, Canadian Metallurgical Quarterly, Vol. 48, No.4, 2009, pp. 419-432
  59. L. Bichler, C. Ravindran and D. Sediako, “Onset of Hot Tearing in AE42 Magnesium Alloy”, Canadian Metallurgical Quarterly, Vol. 48., No. 1, 2009, pp. 81-90 
  60. L. Bichler, C. Ravindran, and D. Sediako, “Neutron Diffraction Measurement of Strain Required for the Onset of Hot Tearing in AZ91D Magnesium Alloy”, Trans. Indian Institute of Metals, Vol. 61, No.3, 2008, pp. 1 – 8.
  61. H. Hao, D. Maijer, S. Cockcroft, M. Wells, D. Sediako, S. Hibbins: “Development and Validation of a Thermal Model of the Direct Chill Casting of AZ31 Magnesium Billets”, Metallurgical and Materials Transaction A, Vol.35A, December 2004, pp. 3843-3854,
  62. D. Sediako, K.J. Lin, O. Sediako, et al: “Technology Development and Quality Control in High-Carbon Bloom Casting”, China Steel Tech. Report, No.14, December, 2000, pp.29-36,
  63. D. Sediako, O. Sediako, K.J. Lin: “Some Aspects of Thermal Analysis and Technology Upgrading in Steel Continuous Casting”, Canadian Metallurgical Quarterly, Vol. 38, No.5, pp. 337-386, 1999
  64. J. Guerard, J. Kamal, I. Samarasekera, E. Essadiqi, A. McLean, D. Sediako, et al: “High speed billet casting”, Canadian Metallurgical Quarterly, 38(5), 1999, pp. 397 – 405.
  65. D. Sediako, K.J. Lin, O. Sediako, et al: “Improvement in the Internal Quality of Slab in Steel Continuous Casting”, China Steel Tech. Report, No.11, pp.63-71, 1997
  66. D. Sediako, K.J. Lin, Y.K. Chen, et al: “Segregation Control in Bloom Casting of High Carbon Steel”, China Steel Tech Report, No. 10, pp. 1-10, 1996
  67. K.J. Lin, D. Sediako, Y.K. Chen, et al: “Upgrading Casting Technology for Centreline Segregation Improvement in High-Carbon Steel Blooms”, Mining and Metallurgy (ISSN 0451-0011), Vol. 40, No.1, March, 1996, pp. 33-42 (in Chinese)
  68. D. Sediako, Z-M. Cao: “Control of Forming of Continuously Cast Steel Billet”, J. of Shanghai University of Technology, Vol. 14, No.1, February, 1993, pp. 81-87 (in Chinese)
  69. Yu. A. Samoilovich, D. G. Sedyako, “Design of electromagnetic stirring conditions involving continuous casting of steels”, Journal of Engineering Physics and Thermophysics, 09/1992; 63:939-942.
  70. Y.Samoilovich, D. Sediako: “Development of Regimes of Electro-Magnetic Stirring for Steel Continuous Casting”, J. of Engineering Physics, Minsk, 1992, vol. 63, pp. 354-357 (in Russian) IFZH7492019928, IFZH749208
  71. O. Sediako, V. Kovalevskii, V. Timofeev, D. Sediako: “Shortage-of-Oxygen Combustion and Intensification of Heat Transfer and Reduction of Oxidation and De-carburisation of Steel in Continuous Furnaces”, Steel, No.11, 1991, pp. 50-52 [Steel in the USSR, Vol. 21, November 1991, pp. 521 – 523]
  72. L. Dymova, P. Sevastianov, D. Sediako, A. Steblov: “Coupled Mathematical Model of Steel Heating, Oxidation, and De-carburization”, Reports of the Academy of Science of Belarus, Vol.34, No.11, 1990, pp.1020-1022 (in Russian)
  73. D.G. Sedyako (Sediako): “Modeling and Control of Thermal Deformation of Continuous Ingot”, J. of Engineering Physics and Thermophysics, Vol. 59, No. 4, 1990, p.168 (in Russian)
  74. D. Sediako: “Control of the Process of Continuous Billet Solidification”, J. of Engineering Physics and Thermophysics, Vol. 59, No.4, October, 1990, p. 694
  75. Y. Malevich, V. Papkovich, P. Sevastianov, D. Sediako, L. Dymova: “Thermal and Thermo-deformation Processes in the Forced Steel Heating”, J. of Engineering Physics, Vol. 58, No.3, October, 1990, p. 402 (IFZH7492019904, IFZH749204)
  76. Y.A. Malevich, D.G. Sediako, V.N. Papkovich, et al: “Thermophysics of Steel Solidification at the Curved-type Billet Continuous Casters” Energy Engineering (Reports of Institutions of Higher Education USSR), No.2, 1990, pp.87-92 (in Russian)
  77. V.B. Kovalevsky, V.I. Panasyuk, D.G. Sedyako (Sediako): “Algorithm of Minimization of Scaling for Metal Heating”, J. of Engineering Physics and Thermophysics, Vol. 59, No. 1, 1990, p.168 (in Russian)
  78. Y. Samoilovich, D. Sediako, Y. Malevich: “Determination of Optimum Regimes for Cooling Steel Strands in Continuous Casting”, Steel in the USSR, Vol. 19, August, 1989, pp. 341-343
  79. Y. Malevich, D. Sediako, P. Sevastianov: “Multi-criteria Optimization of the Steel Reheating Process”, Energy Engineering (Reports of Institutions of Higher Education USSR), No.8, 1989, pp.86-91 (in Russian)
  80. Y. Samoilovich, D. Sediako, et al: “Thermal Work of Gas-Fired Reheating Furnace of Billet Rolling Mill”, Steel, 1989, No. 4, 101-105 [(Minimization of Steel oxidation and de-carbonization in Industrial Rolling-Mill Furnaces), Steel USSR, 1989, 19, (4) BISI 27429]
  81. Y. Samoilovich, D. Sediako, Y. Malevich: “Optimal Cooling in Steel Continuous Casting”, Black Metals, (Reports of Institutions of Higher Education USSR), No.8, 1989, pp. 103-106 (in Russian)
  82. Y. Malevich, D. Sediako, V. Papkovich, et al: “Optimization of Steel Reheating in the Walking-Beam Furnaces”, Energy Engineering, (Reports of Institutions of Higher Education USSR), No. 8, 1989, pp. 86-91 (in Russian)
  83. Y. Samoilovich, D. Sediako, Y. Malevich: “Thermo-Physical Analysis of Equiaxed Crystallization of Continuous Billet”, Reports of Academy of Science of Belarus, Series of Physics-Energy Engineering, No.4, 1989, pp. 94-99 (in Russian)
  84. D. Sediako, Y. Malevich, Y. Mischenko: “Newest Investigations in the Field of Thermo-Physical Properties”, Energy Engineering, (Reports of Institutions of Higher Education USSR), No. 3, 1989, pp. 128 (in Russian)
  85. V. Timoshpolski, D. Sediako, I. Trusova, V. Dyshlevich, S. Sokirkin:  “In-system Analysis of high-temperature metallurgical processes and its application for technologies’ development and successful start-up operation of the Belarussian Metallurgical Works”, Belarus Prize in Science and Technology, 1988, 400 p.
  86. A. Stepanenko, V. Timoshpolski, D. Sediako, M. Tikhonovski: “Analysis and Possibilities of Analytical Solution in Calculations of Reheating Technologies”, Energy Engineering (Reports of Institutions of Higher Education USSR), No.4, 1988, pp. 77-81 (in Russian)
  87. Y. Malevich, L. Shaton, D. Sediako, et al: “Experimental Study of Billet Formation in Steel Continuous Casting at the Radial-type Casters”, Academic and Practical Problems of Energy Engineering, Vol. 14, Minsk, 1987, pp.65-67 (in Russian)
  88. L. Shaton, D. Sediako, A. Kochetkov: “Application of Mathematical Modeling for Analysis of the Metal Heating Process”, Academic and Practical Problems of Energy Engineering, Vol. 14, Minsk, 1987, pp.68-71 (in Russian)
  89. Y. Samoilovich, D. Sediako, Y. Malevich: “Optimization in Steel Continuous Casting”, Black Metallurgy, (Reports of Institutions of Higher Education USSR), No.8, 1987, pp. 102-106 (in Russian)
  90. Y.A. Samoilovich, D.G. Sedyako (Sediako): “Ingot’s Isothermal Crystallization and Determination of its Kinetic Parameters”, J. of Engineering Physics and Thermophysics, Vol. 52, No. 5, 1987, p.860 (in Russian)
  91. Y.A. Samoilovich, D.G. Sediako, Y.A. Malevich: “Thermo-Technical Analysis of Cooling Conditions for Continuously Cast Billet with the Method of Finite Elements”, Energy Engineering (Reports of Institutions of Higher Education USSR), No.5, 1987, pp.86-89 (in Russian)
  92. Y. Samoilovich, D. Sediako, Y. Malevich: “Thermo-physical Analysis of Steel Continuous Casting”, Energy Engineering (Reports of Institutions of Higher Education USSR), No.3, 1987, pp.86-88 (in Russian)
  93. Y.A. Samoilovich, D.G. Sedyako (Sediako), L.V. Shaton: “Calculation of the Solidification Process for an  Ingot of Cylindrical Configuration”, J. of Engineering Physics and Thermophysics, Vol. 52, No. 2, 1987, p.339 (in Russian)
  94. D.G. Sediako: “Thermophysical Analysis and Development of Optimal Regimes of Solidification, Cooling, and Reheating for Continuous Casting and Rolling of Continuous Steel Billets in Industrial Mini-Mills”, Synopsis, Ph.D. Thesis, Sverdlovsk, Russia, November 1987, 25 p. (in Russian)
  95. D.G. Sediako: “Thermophysical Analysis and Development of Optimal Regimes of Solidification, Cooling, and Reheating for Continuous Casting and Rolling of Continuous Steel Billets in Industrial Mini-Mills”, Ph.D. Thesis, Moscow VINITI, Russia, November 1987, 350 p. (in Russian)
  96. V. Timoshpolski, I. Trusova, D. Sediako, V. Temkin: “Analysis of Some Results of Massive Ingots Heating with Radiation”, Academic and Practical Problems of Energy Engineering, Vol. 13, Minsk, 1986, pp. 3-6 (in Russian)
  97. V. Timoshpolski, D. Sediako: “Two-side Radiation Heating of a Thick-wall Tube”, Energy Engineering (Reports of Institutions of Higher Education USSR), No.7, 1986, pp. 74-79 (in Russian)
  98. V. Timoshpolski, Y. Malevich, D. Sediako, et al: “Methods of Calculation of the Radiation Heating for the Massive Ingots”, Minsk, 1985, 19 p., Microfilmed in VNIITI 12.05.85, No. 5988 (in Russian)
  99. Y. Mulev, V. Sudilovski, D. Sediako, V. Levancevic: “Control of the Transient Regimes of Steam Generation at the Startups of Electric Power Blocks with the Steam Humidity Sensors”, Energy Engineering (Reports of Institutions of Higher Education USSR), 1984
  100. D. Sediako, “Development of Coal Gasification Reactor with a Moving Layer for Steam Generator of 250 MW Capacity and Research of Hydrodynamics in the Reaction Zone”, Graduate Research Project, Dept of Thermal Engineering, Belarussian National Technical University, 1983, 120 pp (in Russian)

Conference

  1. Eli Vandersluis*, Comondore Ravindran, Dimitry Sediako, Abdallah Elsayed, Glenn Byczynski, “In-situ Neutron Diffraction to Study the Solidification of Al-Si Alloys”, Materials Science & Technology 2018 (MS&T 2018), October 2018, Columbus, OH
  2. J. Stroh*, D. Sediako, “Residual Strain Characterization of an Advanced Aluminum Marine Alloy Using In-situ Neutron Diffraction”, MS&T-2018, Materials Science & Technology, Columbus, OH, USA, October, 2018
  3. E. Aghaie*, D. Sediako, “Properties Of Various Phases In Al Powertrain Alloys: A Review”, MS&T-2018, Materials Science & Technology, Columbus, OH, USA, October, 2018, 966–973.
  4. Abdallah Elsayed*, Francesco D’Elia*, Dimitry Sediako, and Comondore Ravindran, “Light Metal Solidification Analysis Using In-situ Neutron Diffraction”, Seventh International Conference on Solidification Science and Processing (ICSSP-2018), November 19-22, 2018, Trivandrum, Kerala, India
  5. D. Sediako, J. Stroh*, A. McDougall*, E. Aghaie* “Residual Stress Analysis of A362 Aluminum Alloy Gear Case using Neutron Diffraction”, Thermec 2018, 10th International Conference on Processing and Manufacturing of Advanced Materials July 4-8, Paris, France, Invited, pp. 1288-1294
  6. Ermia Aghaie*, Joshua Stroh*, Dimitry G. Sediako, Mathew Smith*, “In-situ Fitness-for-Service Assessment of Aluminum Alloys Developed for Automotive Powertrain Lightweighting”, The Minerals, Metals & Materials Society (TMS). Aluminum Alloys, Processing and Characterization, Light Metals 2018. TMS 2018. The Minerals, Metals & Materials Series. Springer, Invited, pp.397-400
  7. J. Stroh*, T. Davis*, Alexandra McDougall*, D. Sediako, “In-situ Study of Solidification Kinetics of Al-Cu and Al-Ce Alloys with Application of Neutron Diffraction”, The Minerals, Metals & Materials Society (TMS), Cast Shop Technology: Fundamentals of Aluminum Alloy Solidification, Light Metals 2018.  Invited, pp. 1059-1065
  8. Tyler Davis*, Lukas  Bichler, Dimitry Sediako, Levente Balogh, “Solidification Analysis of Grain Refined AZ91D Magnesium Alloy via Neutron Diffraction”, The Minerals, Metals & Materials Society (TMS), Magnesium Technology 2018: Magnesium Alloy Development, Invited, pp. 425-428
  9. D. Sediako, D. Weiss, A. Nabawy*, “Advanced Aluminum Alloy Development and In-Situ Fitness-for-Service Testing for Automotive Lightweighting”, The Minerals, Metals & Materials Society 2017, K.N. Solanki et al. (eds.), Magnesium Technology 2017, The Minerals, Metals & Materials Series, pp. 639-644, DOI 10.1007/978-3-319-52392-7_88
  10. A. Lombardi*, E. Vandersluis*, D. Sediako, C. Ravindran, “Neutron Diffraction Analysis of Light Alloys: A Review”, Keynote, THERMEC-2016, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS, Graz, Austria, May 2016
  11. M. Smith*, L. Bichler, D. Sediako, J. Gholipour, P. Wanjara, “Measurement of Residual Stresses in Linear Friction Welded In-Service Inconel 718 Superalloy”, THERMEC-2016, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS, Graz, Austria, May 2016
  12. S. Ahmad*, D. Sediako, A. Lombardi, C. Ravindran, R. MacKay, A.M. Nabawy*, “Assessment of Residual Stress in T5 treated 319 Al Alloy Engine Blocks Using Neutron Diffraction”, SAE World Congress, Detroit, MI, April, 2016.
  13. D. Sediako, W. Kasprzak, F. Czerwinski, A. Nabawy*, and A. Farkoosh*, “High Temperature Creep Evolution in Al-Si Alloys Developed for Automotive Powertrain Applications – A Neutron In-Situ Study on hkl-Plane Creep Response”,  Light Metals 2016, TMS-2016, Tennessee, February 2016, pp. 131-136.
  14. A. Elsayed*, D. Sediako, R. Ravindran, “Solidification Analysis of Magnesium-Zinc Alloys Using In-situ Neutron Diffraction”, Shape Casting: 2016, TMS-2016, Tennessee, February 2016, pp. 167-174.
  15. A. Lombardi*, D. Sediako, C. Ravindran, R. Mackay, “Residual Stress Mapping along the Cylinder Bores of Al Alloy Engine Blocks Subjected to Production Solution Heat Treatment Schedule”, SAE World Congress 2014, doi:10.4271/2014-01-0837 Published 04/01/2014, © 2014 SAE International, pp. 415-420
  16. V. Kumar*, D. Sediako, L. Bichler, “Effect of Chill Parameters on the Residual Strain in Cast 319 Aluminum  Alloy: A Neutron Diffraction Study”, SAE World Congress 2014, Published 04/01/2014, © 2014 SAE International, doi:10.4271/2014-01-0836, pp. 411-414
  17. F. D’Elia*, A. Lombardi*, C. Ravindran, D. Sediako, and K. Rao, “Assessment of Hot Cracking during TIG Welding of B206 Aluminum Alloy”, Light Metals 2014, Edited John Grandfield, TMS (The Minerals, Metals, and Materials Society), February 2014,  pp. 195-199
  18. M.J. Walker, D.R. Hess, and D.G. Sediako, “Residual Stress Analysis in Semi-Permanent Mold Engine Head Castings”, Light Metals 2014, Edited John Grandfield, TMS (The Minerals, Metals, and Materials Society), John Wiley & Sons, Inc., Hoboken, NJ, USA, February 2014,  pp. 355-357.
    1. doi: 10.1002/9781118888438.ch60
  19. W. Threlfall*, L. Bichler,  and D. Sediako, “Quantitative Analysis Of Elastic And Plastic Response Of Advanced Mg Alloys During Creep At 170 ºC Using Neutron Diffraction Techniques”, Applied Neutron Scattering in Engineering and Materials Science Research, Materials Science and Technology (MS&T) 2013, October 27-31, 2013, Montreal, Quebec, Canada, pp. 951 – 961
  20. A. Elsayed, D. Sediako, C. Ravindran, “Solidification of Mg-9%Al Alloy Using In-Situ Neutron Diffraction”, Applied Neutron Scattering in Engineering and Materials Science Research, Materials Science and Technology (MS&T) 2013, October 27-31, 2013, Montreal, Quebec, Canada, pp. 972-979
  21. F. D’Elia, C. Ravindran, D. Sediako, and R. Donaberger, “Solidification Analysis of an Al-5 wt% Cu Alloy Using In-Situ Neutron Diffraction” Applied Neutron Scattering in Engineering and Materials Science Research, Materials Science and Technology (MS&T) 2013, October 27-31, 2013, Montreal, Quebec, Canada, pp. 964-971
  22. V. Neykov, L. Bichler, and D. Sediako, “Effect Of Heat Treatment On The Residual Strain Levels In Welded Ar200 Steel Joints” Applied Neutron Scattering in Engineering and Materials Science Research, Materials Science and Technology (MS&T) 2013, October 27-31, 2013, Montreal, Quebec, Canada, pp. 962-963
  23. Lombardi, A., Ravindran, C., Sediako, D. and Mackay, R., “Analysis of Residual Strain Profiles in Distorted Aluminum Engine Blocks by Neutron Diffraction”, ”,  SAE World Congress 2013, Detroit, MI, April 16-18, 2013-01-0171
  24. D. Sediako, L. Bichler, M. van Hanegem, and S. Shook, “Compressive Creep Properties Of Wrought High Temperature Magnesium Alloys In Axial And Transverse Orientation – A Neutron Diffraction Study”, TMS-2013, Magnesium Technologies 2013, DOI: 10.1002/9781118663004.ch2
  25. W. Kasprzak, D. Sediako, M. Aniolek, and H. Kurita, “Microstructure Development In Hypereutectic Cast Al-Si Alloys Evaluated By Metallurgical Analysis And Neutron Diffraction”, 13th International Conference on Aluminum Alloys (ICAA13), TMS-2012, pp. 1431-1440.
  26. A. Lombardi, D. Sediako, F. D’Elia, C. Ravindran, and R. Mackay, “Neutron Diffraction Study on Residual Stress in Aluminum Engine Blocks Following Machining and Service Testing”,  SAE World Congress 2012, Detroit, MI, April 24-26, 12-01-0188
  27. D. Sediako, W. Kasprzak, “Neutron Diffraction Analysis Of Phase Precipitation In Solidification Of Hypereutectic Al-Si Alloys with the Addition of Cu and Mg”, Aluminum Alloys 2012, TMS, Light Metals 2012, March 11-15, 2012, Orlando, Florida, 2012-05-23, p. 355-364
  28. M. Fletcher, L. Bichler, D. Sediako, “The Role of Intermetallics on Creep Behaviour of Extruded Magnesium Alloys”, Magnesium Technology 2012, TMS, Orlando, Florida, pp. 449-454
  29. D. Sediako, A. Lombardi, F. D’Elia, C. Ravindran, A. Machin, R.B. Rogge, R. MacKay, “Residual Stress Mapping In The Interbore Region Of A Heat Treated Aluminum Engine Block”, Conference of Metallurgists 2011, MetSoc of CIM, Montreal, Quebec, October 2011, pp. 331-342.  
  30. D. Sediako, F. D’Elia, A. Lombardi, A. Machin, C. Ravindran, C. Hubbard, and R. Mackay, “Analysis of Residual Stress Profiles in the Cylinder Web Region of an As-Cast V6 Al Engine Block with Cast-In Fe Liners Using Neutron Diffraction”,  SAE World Congress 2011, Detroit, MI, April 12-14, 11M-0362
  31. M. Fletcher, L. Bichler, D. Sediako, and R. Klassen, “COMPRESSIVE CREEP BEHAVIOUR OF EXTRUDED Mg ALLOYS AT 150 °C”, The Minerals, Metals & Materials Society, TMS, San Diego, CA, February 2011, Magnesium Technology 2011, pp. 79-83.
  32. D. Sediako, W. Kasprzak, I. Swainson, and O. Garlea, “Solidification Analysis Of Al-Si Alloys Modified With Addition Of Cu Using In-Situ Neutron Diffraction”, The Minerals, Metals & Materials Society, TMS, San Diego, CA, February 2011, Aluminum Alloys: Fabrication, Characterization and Applications, Supplemental Proceedings: Vol.2: Materials Fabrication, Properties, Characterization, and Modeling, pp. 279-289.
  33. D. Sediako, F. D’Elia, A. Lombardi, A. Machin, C. Ravindran, C. Hubbard, R. Mackay, “Application Of Neutron Diffraction In Analysis Of Residual Stress Profiles In The Cylinder Web Region Of An As-Cast V6 Al Engine Block With Cast-In Fe Liners”, The Minerals, Metals & Materials Society, TMS, San Diego, CA, February 2011, Aluminum Alloys: Fabrication, Characterization and Applications, Supplemental Proceedings: Vol.2: Materials Fabrication, Properties, Characterization, and Modeling, pp.299-308.
  34. W. Kasprzak, D. Sediako, M. Sahoo, M. Walker, I. Swainson, “Solidification analysis of Al-Si alloy using in-situ neutron diffraction”, Light Metals 2010: Advances in Materials and Processes, (COM 2010 49th Conference of Metallurgists, October 3-6, 2010, Vancouver, British Columbia), ISBN: 1-894475-99-2, 2010-10-01, p. 121-132
  35. D. Sediako, S. Shook, S. Vogel, and A. Sediako, “Application of Neutron Diffraction in Characterization of Texture Evolution during High-Temperature Creep in Magnesium Alloys”, Canadian Nuclear Society, CNS-2010 Conference Proceedings, Montréal, May 26-29,  2010 
  36. L. Bichler, F. D’Elia, C. Ravindran, and D. Sediako, “Reduction of Hot Tears: Alloy and Casting Process Optimization using Neutron Diffraction”, Society of Automotive Engineers (SAE), Proceedings of 2010 World Congress, April 13 – 15, 2010, Detroit, MI
  37. W. Kasprzak, D. Sediako, M. Sahoo, M. Walker, and I. Swainson, “In-Situ Neutron Diffraction and Thermal Analysis Techniques in Solidification Characterization of Automotive Hypereutectic Al-Si Alloys”, Advances in Light Weight Materials – Aluminum, SAE 2010 World Congress, Detroit, MI, April 13-15  
  38. W. Kasprzak, D. Sediako, M. Sahoo, M. Walker, and I. Swainson, “Characterization Of Hypereutectic Al-19%Si Alloy Solidification Process Using In-Situ Neutron Diffraction And Thermal Analysis Techniques”, The Minerals, Metals & Materials Society, TMS, Seattle, WA, February, 2010, Aluminum Alloys: Fabrication, Characterization and Applications, Supplemental Proceedings: Vol.1: Materials Processing and Properties, pp.93-104.
  39. M. Celikin, D. Sediako, M. Pekguleryuz, “Texture Change in Pure Mg and Mg-1.5wt%Mn Casting Alloy during Compressive Creep-Deformation,” Magnesium Technology, TMS, Seattle, Washington, Feb 2010.
  40. M. Çelikin, D. Sediako, and M. Pekguleryuz, “Effect of Compressive Creep-Deformation on the Crystallographic Texture of – Pure Mg and Mg-Mn Casting Alloys”, The Minerals, Metals & Materials Society, TMS, Seattle, WA, February, 2010, Magnesium Technology 2010, pp. 249-251
  41. D. Sediako, S. Shook, “Application Of Neutron Diffraction In In-Situ Studies Of Stress Evolution In High Temperature Creep Testing Of Creep-Resistant Magnesium Alloys”, The Minerals, Metals & Materials Society, TMS, San Francisco, CA, February 2009, Magnesium Technology 2009, pp. 255-259.
  42. L. Bichler, C. Ravindran and D. Sediako, “Residual Stress Development at the Onset of Hot Tearing of AZ91D Magnesium Alloy”, presented at MetSoc -2008, CIM, Winnipeg, 2008
  43. L. Bichler, C. Ravindran and D. Sediako, “Residual Stress Development at the Onset of Hot Tearing in AZ91D Magnesium Alloy”, 17th International Conference on Processing of Advanced Materials, New Delhi, India, December 15 – 18, 2008.
  44. D.G. Sediako and M.A. Gharghouri: “Neutron Diffraction Measurements Of Residual Stresses In Creep-Resistant Magnesium Alloys”, The Minerals, Metals & Materials Society, TMS, New Orleans, LA, March 2008, Magnesium Technology 2008, pp. 407-409
  45. D. Sediako, W. MacDonald, and S Hibbins: “Mould Thermal Analysis In Direct-Chill Casting Of Magnesium Alloys”, The Minerals, Metals & Materials Society, TMS, New Orleans, LA, March 2008, Magnesium Technology 2008, pp. 215-219
  46. D.G. Sediako, O. Sediako: “A Nouvelle Thermo Physical Solution To The Bloom/Slab Deformation Problem In Dc Casting Of Light Metals”, The Minerals, Metals & Materials Society, TMS, New Orleans, LA, March, 2008, Materials Characterization, Computation, and Modeling, 2008, pp. 323-329
  47. D.G. Sediako and M.A. Gharghouri: “Effect of Alloying Additions on Texture Development in Hot Processing of Creep Resistant Magnesium Alloys”, Light Metals in Transport Application:  46th Annual Conference of Metallurgists of CIM: pp. 339-348, 2007
  48. D.G. Sediako, M.A. Gharghouri, R.B. Rogge, M.J. Watson: “Study of Texture Evolution During Channel-Die Compression of Mg-Al Alloys by In-Situ Neutron Diffraction”, Magnesium Technology 2007:  TMS (The Minerals, Metals & Materials Society):  pp. 351-356
  49. L.M.D. Cranswick, K.T. Conlon, R.L. Donaberger, J. Fox, L. McEwan, R. Rogge, D. Sears, D. Sediako, I. P. Swainson, T. Whan, “Neutron Powder Diffraction of radioactive irradiated low enrichment Uranium-Molybdenum nuclear fuel”, European Powder Diffraction Conference, Geneva, September 1-4, 2006
  50. D.G. Sediako, M.A. Gharghouri and M.J. Watson, “Study Of Texture And Strain Evolution During Channel-Die Compression Of Mg-Al Alloys By In-Situ Neutron Diffraction”, International Symposium On Advanced Characterization Techniques, MetSoc, COM -2006, CIM, Montreal, PQ, 2006
  51. E.J. Caron, M.A. Wells, D.G. Sediako, S.G. Hibbins: “Evaluation of the Surface Heat Flux in the Secondary Cooling Zone During the DC Casting of Magnesium Alloy AZ31”, Magnesium Technology 2005, TMS (The Minerals, Metals & Materials Society), San Francisco, February 2005
  52. E. H. Lu, D. M. Maijer, D. Sediako: “A Mathematical Model of Heat Transfer and Fluid Flow in the Direct Chill Casting of AZ31 Magnesium Billets”, Magnesium Technology 2005, TMS (The Minerals, Metals & Materials Society), San Francisco, February 2005
  53. H. Hao, D.M. Maijer, M.A. Wells, S.L. Cockcroft, D.G. Sediako, S.G. Hibbins: “Thermal Modeling of DC Casting for AZ31 Magnesium Billets”, presented at 42nd Conference of Metallurgists, The Metallurgical Society of CIM, August 24 to 27, 2003, Vancouver, BC; published in COM2004 Light Metals, pp. 567-577
  54. D. Sediako, O. Sediako, K.J. Lin: “Quality Evaluation System for Bloom Casting of High-Carbon Steels”, 82nd Steelmaking Conference Proceedings, 1999, pp.225-235, Chicago, Il, USA
  55. D. Sediako, K.J. Lin, S.Y. Lee, et al.: “Transverse Cracking Prevention and Segregation Reduction in Slab Continuous Casting”, 1997 Steelmaking Conference Proceedings, pp. 351-357, Chicago, IL, USA
  56. Y.K. Chen, F.A. Feng, K.J. Lin, D. Sediako: “Improvement of Centre Segregation for High Carbon Steel Bloom”, 1996 Steelmaking Conference Proceedings, pp. 505-512, Pittsburgh, PA, March 24-27, 1996

Work In Progress (Including degree of completion)

  • J. Stroh*, D. Sediako, A. Lombardi, G. Byczynski, M. Reid, A. Paradowska, “Residual Stress Evolution of Sand-Cast Aluminum Engine Blocks Manufactured with Pressed-In Iron Liners”, Journal of Materials Processing, in submission, 95% completion
  • Abdallah Elsayed, Dimitry Sediako and Comondore Ravindran, “In-situ neutron diffraction of grain refinement in Mg-Zn and Mg-Zn-Zr alloys”, in submission (paper completed)
  • E. Aghaie*, J. Stroh*, D. Sediako, “Microstructure and High-Temperature Properties of A319 Aluminum Alloy modified with the addition of Cerium”, Intermetallics, in submission, 85% completion
  • J. Stroh*, J. Kozakevich*, D. Sediako, D. Weiss, “XRD and Rietveld Analyses in Studies of Intermetallic Phases in RE: Al8Ce10Mg + 10wt.% Al2O3 Metal Matrix Composite”, Materials Science and Engineering A, in preparation, 70% completion
  • S. Kianfar*, R. Walallawita*, N. Bahramian*, D. Sediako, “Numerical Modelling and Experimental Investigation of the Evolution of Residual Stress in As-Cast and Heat Treated Engine Blocks”, Metallurgical and Materials Transactions A, in preparation, 70% completion
  • J. Stroh*, D. Sediako, D. Weiss, “Coefficient of Thermal Expansion of Rare-Earth Bearing Intermetallics with Application of In-Situ Neutron Diffraction”, Journal of Materials Processing, in preparation, 50% completion
  • J. Stroh*, D. Sediako, S. Vogel, “Rietveld Phase and Texture Analysis of Elevated Temperature Conditioned Rare-Earth Modified Aluminum Alloys”, Journal of Materials Processing, in preparation, 50% completion
  • N. Sabry*, D. Sediako, A. Lombardi, G. Byczynski, (Nemak Global Team), “Effect of Friction Stir Welding Operations and Post Processing Straightening on the Residual Stress of Electric Vehicle Battery Trays”, Materials Science and Engineering A, in preparation, 40% completion
  • N. Bahramian*, R. Walallawita*, D. Sediako, J. Tjong, “Comparative Analysis of the Tribological Characteristics and Performance of EJPO and PTWA Coatings for Application in Next Generation Engines”, Metallurgical and Materials Transactions A, in preparation, 30% completion
  • R. Walallawita*, N. Bahramian*, D. Sediako, “Effects of EJPO and PTWA Coatings on the Residual Stress Profiles of Cast Aluminum V8 Engine Blocks”, Materials Science and Engineering A, in preparation, 30% completion
  • J. Kozakevich*, J. Stroh*, D. Sediako, “Improving the Elevated Temperature Fitness-for-Service Properties of an A356RE Alloy Through Addition of Nano-Scale Al2O3“, Metallurgical and Materials Transactions A, in preparation, 30% completion
  • J. Kozakevich*, D. Sediako, “Development of Next Generation Metal Matrix Composite Powertrain Alloys via Green Compaction and Conventional Sintering”, Materials Science and Engineering A, in preparation, 30% completion
  • J. Kozakevich*, J. Stroh*, D. Sediako, “Effect of Solidification Cooling Rate on the Microstructure and Tensile Properties of a Near Eutectic Al9Ce4Ni Alloy”, in preparation, Journal of Materials Processing, 30% completion